|
|
| Page 1 of 1 |
|
|
 Posted: Fri, 25th Nov 2005 19:44 Post subject: [GAMECUBE] Problems burning images |
|
 |
Hi all,
Im having some issues burning my NGC images, they burn fine, without any errors, but when they are running on modded cubes (qoobchip installed) some games freeze and others just work fine, i tried burning with nero7, dvd decrypter and sonic recordnow, and miniDVD Ritek, any software recommended for do this burning thing ? im thinking they have the same trick that the dreamcast games had to burn, just guessing, any help ? 
|
|
| Back to top |
|
|
fisk
Posts: 9145
Location: Von Oben
|
| Posted: Mon, 28th Nov 2005 06:23 Post subject: |
|
|
What media are you using? Some are worse than others.
Yes, yes I'm back.
Somewhat.
|
|
| Back to top |
|
|
|
|
| Posted: Mon, 28th Nov 2005 06:34 Post subject: |
|
|
| fisk wrote: | | What media are you using? Some are worse than others. |
Ritek 4x, is the only media i have, my burner is AOPEN 16x dual and LITEON 12x, i had problems using both burners, i know is not the media, i bought the same media that the gamecube rental store have.
|
|
| Back to top |
|
|
pancake
Posts: 1091
Location: England
|
| Posted: Wed, 30th Nov 2005 16:57 Post subject: |
|
|
are you getting iso's or rar sets? if your getting iso's then i would imagine some of them are corrupt. what speed do you burn at? i do x2 for gamecube and everyone works perfectly
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 1st Dec 2005 01:46 Post subject: |
|
|
| pancake wrote: | | are you getting iso's or rar sets? if your getting iso's then i would imagine some of them are corrupt. what speed do you burn at? i do x2 for gamecube and everyone works perfectly |
yea i check the rars using sfv, they are ok, i cant burn at 2x, my burner dont let me, only 4x
|
|
| Back to top |
|
|
Rofl_Mao
Posts: 3187
Location: Nederland
|
| Posted: Mon, 9th Jan 2006 14:21 Post subject: |
|
|
Much more info on cube modding here http://modthatcube.pxn-os.com/main.htm
Use discs with the RITEKG04 dye.
The laser may still need tweaking to read burned discs. Underneath the DVD drive is a variable resistance, lower it to 200-185 Ohms (not less, or you'll fry it), check with a multimeter.
Some older ISOs (released before the Viper chip) have garbage data removed and won't run on a chipped cube. Use a programme called FSTFIX to fill in the missing bytes. Tutorials on http://modthatcube.pxn-os.com/main.htm, as mentioned.
| Lopin18 wrote: | I think you played too much Fallout 3, Pedo Perk acquired.  |
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 26th Jan 2006 20:44 Post subject: |
|
|
| Rofl_Mao wrote: | Much more info on cube modding here http://modthatcube.pxn-os.com/main.htm
Use discs with the RITEKG04 dye.
The laser may still need tweaking to read burned discs. Underneath the DVD drive is a variable resistance, lower it to 200-185 Ohms (not less, or you'll fry it), check with a multimeter.
Some older ISOs (released before the Viper chip) have garbage data removed and won't run on a chipped cube. Use a programme called FSTFIX to fill in the missing bytes. Tutorials on http://modthatcube.pxn-os.com/main.htm, as mentioned. |
Thanks, i fixed my problem buying another burner, this time im using AOPEN DUW1616ARR, burning at 4x with IMGBURN with not problems.
|
|
| Back to top |
|
|
| Page 1 of 1 |
All times are GMT + 1 Hour |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB 2.0.8 © 2001, 2002 phpBB Group
|
|
 |
|
