| Page 1 of 5 |
|
|
 Posted: Sat, 3rd Dec 2005 19:15 Post subject: Prince of Persia T2T SFCloneDVD Problem |
|
 |
the Nfo says "Remove all IDE drives and Play"
as i understand its Starforce Nightmare..
i installed the game and download Sfn latest version
my computer is built like that:
Primary IDE Master Location 0 : NEC 3540A
Bus Number 0, Target ID 0, LUN 0 : Hard Disk (S-ATA II)
now i tried on Sfn the following choices:
Disable ch1 - computer Stuck /Restart
Disable ATA - computer stuck /Restart
Disable CD - Game not works
Disable Pr.Master - Game Not Works
tried to enter Device manager and disable CD/SCSI(DT) manualy
game not works... also
any help will be appricated?
(a friend is suggest me to move DVD-ROM to Secodery Master cause maybe the Sfn catchs the Primary with the Serial-ATA also..?)
P4 3.6Ghz 2MB 64bit
2GB RAM DDR2
Geforce 7800GT
250GB 16MB SATA2
Zalaman CNPS9500
-=The Doom Master=-
|
|
| Back to top |
|
|
X_Dror
Posts: 4955
Location: Jerusalem, Israel
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 3rd Dec 2005 20:09 Post subject: |
|
|
IN SFN:
disable node
disable cd
disable ATA
That was what I had to do to get it working... but everyone seems to have their own way..
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 3rd Dec 2005 21:04 Post subject: |
|
|
I'm gonna download the game tomorrow,so about the disabling:IF it works,should I use the same things like I did to run TM Sunrise?
=> Disable node,disable cd?
And what about those ch1/ch2 or ata,I don't really know much about the position of my drives,etc...
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 3rd Dec 2005 21:37 Post subject: |
|
|
it think that u need to use the same configuration as TM Sunrise the Starforce nightmare is "per" computer configuration and besides u can always check out the readme included
P4 3.6Ghz 2MB 64bit
2GB RAM DDR2
Geforce 7800GT
250GB 16MB SATA2
Zalaman CNPS9500
-=The Doom Master=-
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 3rd Dec 2005 22:27 Post subject: |
|
|
Same problem here. Did everything I did for King Kong or TM Sunrise. Doesn't work. No idea.
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 3rd Dec 2005 22:44 Post subject: |
|
|
lol i found the answer and its Sweet
Daemon Tools Forums :
"A special note for nForce 3/4 users
The IDE controller that is used on nForce 3/4-based motherboards cannot be directly addressed by today's copy protections; as a result, SCSI blacklists don't work on those systems. If you are fortunate enough to have an nForce 3/4-based system, you should be able to run all the latest SafeDisc-, SecuROM- and StarForce-protected games with your IDE CD/DVD drives plugged in and working."
P4 3.6Ghz 2MB 64bit
2GB RAM DDR2
Geforce 7800GT
250GB 16MB SATA2
Zalaman CNPS9500
-=The Doom Master=-
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 3rd Dec 2005 22:49 Post subject: |
|
|
I've got nforce4 and King Kong didn't work ..
Almost got PoP though, will try it
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 00:09 Post subject: |
|
|
I am such an idiot. I mounted the mdf...
Working perfect, running smoothly.
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 04:41 Post subject: |
|
|
Damn it!
I Can't get this to work.
I mounted the image with DT4 and the game launches, I get to see the ubisoft log, the game title, but then when it says "loading" windows crashes. Blue screen with a .dll causing a problem (goes to fast for me to read), then it just restarts.
UPDATE: The dll file is an Nvidia dll NV4.dll I think.
I tried using different drivers but 8194 and 8195 are the only things that support the 7800GTX 512MB.
If I try to run the game after the computer crashes and restarts, I'm asked to run in safe mode or regular. If I choose safe mode, I actually make it past the loading point and into the "create profile screen" As soon as I enter a name and hit "create" the computer chrashes again, Fvkc!
Any ideas?
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 06:09 Post subject: |
|
|
Jeeeeeez Im totallly frustrated after I tried EVERYTHING and nothing works I still get the freaking error to insert the disc into another driver. I used all the cleaning, disabling programs for starforce and I have DT4 with all options enabled, still it does not work! Somebody help!
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 06:20 Post subject: |
|
|
same here doesnt want to run...ordered a new controller card was wondering if that would work,,,the one with silicone image chip??would it work??
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 08:28 Post subject: |
|
|
| bvnbvn_2000 wrote: | | Jeeeeeez Im totallly frustrated after I tried EVERYTHING and nothing works I still get the freaking error to insert the disc into another driver. I used all the cleaning, disabling programs for starforce and I have DT4 with all options enabled, still it does not work! Somebody help! |
whats the problem ppl?
if its asking for another drive,all you have to do its just rename your virtual drive in regedit and thats it.
im runing ALL games with dt4 only.
just go:
start->run->regedit->HKEY_LOCAL_MACHINE->system->mounted_devices
found your virtual drive in the list and rename it,like that:
\DosDevices\H.hiden:
play the games
but remember to do the same every time you restart the system,delete old renamed drive and rename the new one in list
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 09:51 Post subject: |
|
|
romul22,
I can see other devices(virtual ones I guess) that aren't visible if I open "My Computer"
Should I rename them to hidden too?
EDIT:You're a genius!
I could play Stubbs and F.E.A.R(mounted) without using antiblah...
So you mean that it is possible to play PoP with this simple method
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 10:25 Post subject: |
|
|
| romul22 wrote: | | bvnbvn_2000 wrote: | | Jeeeeeez Im totallly frustrated after I tried EVERYTHING and nothing works I still get the freaking error to insert the disc into another driver. I used all the cleaning, disabling programs for starforce and I have DT4 with all options enabled, still it does not work! Somebody help! |
whats the problem ppl?
if its asking for another drive,all you have to do its just rename your virtual drive in regedit and thats it.
im runing ALL games with dt4 only.
just go:
start->run->regedit->HKEY_LOCAL_MACHINE->system->mounted_devices
found your virtual drive in the list and rename it,like that:
\DosDevices\H.hiden:
play the games
but remember to do the same every time you restart the system,delete old renamed drive and rename the new one in list |
Well im out of fukin ideas.. I only have DT4 installed I: is the virtual drive
I get the please insert POP3 in another drive error..
edit the reg to \DosDevices\I.hiden
and I still get the same error
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 10:29 Post subject: |
|
|
Did you use \DosDevices\I.hidden: ?
I'm gonna try it in about an hour
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 11:56 Post subject: |
|
|
When starfoce is cheking my disk,my pc goes for reboot,i did all that ppl posts here...and i got only reboot 
Sorry for my bad english 
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 12:26 Post subject: |
|
|
So...can anyone help us? 
Sorry for my bad english
|
|
| Back to top |
|
|
Pixies
Posts: 382
Location: Deep in the Caribbean
|
| Posted: Sun, 4th Dec 2005 12:51 Post subject: |
|
|
Finally got this game to work after being up all night searching for downloads, and then working for around two hours more to get it to start. Fortunately, it seems well worth it. 
What I did was first to attempt starforce nightmare and device manager disabling, but neither of them would enable me to get through the protection drive check. Then I opened the case and pulled out the power cables for my dvd rom and burner and tried again, and the protection check would now halt after 1/4 and then reboot my computer. Annoying beyond words.
I decided to give it a last shot, plugged everything back in and rebooted, reinstalled DT4 and enabled all emulation options (probably doesn't matter in this case), then shut down, pulled out the power cables of every non-essential drive I have (dvd rom, burner, second harddrive). Booted up again, held my breath, and almost jumped for joy when the Ubisoft intro popped up.
Going to check out the game a bit more now, and then grab some sleep. Good luck to you guys.
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 13:33 Post subject: |
|
|
It didnt work for me ((( still rebooting
Sorry for my bad english
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 13:36 Post subject: |
|
|
Hi all.
I have Epox 8RDA3+ and there is Sata Constroller Sil 3112
And I have this configuration
IDE 1:Nec DVD_RW ND-3540A - Master
IDE 2:Teac W540E - Master
SATA Sil 3112
Chanel 0 - HDD 1
Chanel 1 - HDD 2
And I made that,
I just disable "IDE ATA/ATAPI Controllers" disable in Device Manger
There was NVIDIA nForce2 ATA Controller (2.6)
Example if you have 1 HDD and 1 CD-ROM
And each on the separated IDE then if you have in Device manager Primary .............. Controller
Secondary ..... controller then just disable the controller on which you have your cd-rom.
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 4th Dec 2005 13:40 Post subject: |
|
|
| Mastahh wrote: | Hi all.
I have Epox 8RDA3+ and there is Sata Constroller Sil 3112
And I have this configuration
IDE 1:Nec DVD_RW ND-3540A - Master
IDE 2:Teac W540E - Master
SATA Sil 3112
Chanel 0 - HDD 1
Chanel 1 - HDD 2
And I made that,
I just disable "IDE ATA/ATAPI Controllers" disable in Device Manger
There was NVIDIA nForce2 ATA Controller (2.6)
Example if you have 1 HDD and 1 CD-ROM
And each on the separated IDE then if you have in Device manager Primary .............. Controller
Secondary ..... controller then just disable the controller on which you have your cd-rom. |
I did that...i got nforc4,but when starforce cheking disk my pc goes for reboot
|
|
| Back to top |
|
|
| Page 1 of 5 |
All times are GMT + 1 Hour |
