DAEMON Tools And SPTD
Page 1 of 1
JiGSaW
VIP Member



Posts: 4196

PostPosted: Sun, 19th Nov 2006 16:11    Post subject: DAEMON Tools And SPTD
Quote:
Changelog:

This new version supports silent setup now.
Example: daemon408-x86.exe /S /D=F:\Some Folder\
Note that no quotes must be used in installation path even if name has spaces.
All critical errros will be still displayed no matter silent or not.
Case of parameters is important, eg. /s will not work.
Reboot prompt will not be shown.

If SPTD was not present then it will be silently installed but
PC will not be rebooted - it is assumed the administrator who
performs unattended install will take care of reboot and restarts DT setup after reboot in this case.

It is best first to use standalone SPTD installer and install it silently this way:

sptdinst-x86.exe add /q

Note: SPTD 1.37 will not display debugger warning dialog anymore. They left this info in EULA only as this message confuses many users and also not "silent setup friendly".
Standalone SPTD 1.37 installer is released by Duplex Secure officially and can be obtained at their website http://www.duplexsecure.com

Also fixed:

alot of Installation problems (f.e. invalid device, prob 12 etc).
SPTD 1.37 fixes also problem reported with virtual drive from InterVideo DVD Copy 5.


http://www.daemon-tools.cc


Download DAEMON Tools 4.0.8 X86

http://www.mytempdir.com/1068582
http://rapidshare.com/files/3882704/daemon408-x86.rar

Download DAEMON Tools 4.0.8 X64

http://www.mytempdir.com/1068590
http://rapidshare.com/files/3882260/daemon408-x64.rar


Last edited by JiGSaW on Sat, 7th Apr 2007 07:30; edited 1 time in total
Back to top
Mortibus




Posts: 18053
Location: .NL
PostPosted: Sun, 19th Nov 2006 16:22    Post subject:
thnx for the update JiGSaW Wink
Back to top
Hfric




Posts: 12017

PostPosted: Sun, 19th Nov 2006 20:51    Post subject:
can say this that securom 7/Safedisk [all versions] are fully emulated if you do my win reg trick , the same goes for every Starforce 3.xx version , Starforce 4 games work some times but only after the forth or seventeen try ... conclusion : i see progress on both fronts Daemons and Alcohols , now i only wait when those two programs will mix together under the name DT Pro


Back to top
jlobee




Posts: 173

PostPosted: Mon, 20th Nov 2006 05:55    Post subject:
Hfric wrote:
can say this that securom 7/Safedisk [all versions] are fully emulated if you do my win reg trick , the same goes for every Starforce 3.xx version , Starforce 4 games work some times but only after the forth or seventeen try ... conclusion : i see progress on both fronts Daemons and Alcohols , now i only wait when those two programs will mix together under the name DT Pro


What is this win reg trick you speak of?
Back to top
LeoNatan
☢ NFOHump Despot ☢



Posts: 73196
Location: Ramat Gan, Israel 🇮🇱
PostPosted: Mon, 20th Nov 2006 17:57    Post subject:
Your reg trick doesn't work for me, Hfric, sorry to be a praty pooper, lol.
Back to top
JiGSaW
VIP Member



Posts: 4196

PostPosted: Sat, 7th Apr 2007 07:31    Post subject:
SPTD, Version 1.43 - public beta

Change log:
- Fixed some issues with USB storage devices, like U3
- Fixed some problems with dual core systems
- Minor fixes

http://disc-tools.com/download/sptdbeta
Back to top
JiGSaW
VIP Member



Posts: 4196

PostPosted: Sat, 14th Apr 2007 12:32    Post subject:
DAEMON TOOLS V4.09 released!

Dear Community,

today we released new version of Daemon Tools, V4.09 with SPTD V1.43.

We recommend to upgrade to the latest version as usual. Please note:
all former translations will not work with actual version, we ask all
our friends to help us with actual translations for new V4.09
(see also former announcement!)


Quote:
Changes in this version:

- Support for StarForce 4.70.
- Support for compressed and encrypted *.mds images which soon will be created by Alcohol and DAEMON Tools Pro.
- Support for compressed and encrypted *.isz images created by UltraISO.
- Fixed some minor issues with image autorun, autostart option etc. (also HKCU is used now instead of HKLM).
- Added "Check for updates" option (periodically checks for new version at each tray start).
- Internal virtual drive engine enhancements.
- Fixed installation problems on Dell systems with Embassy Trust Suite


DAEMON Tools v4.09 X86 32 Bits (with SPTD 1.43)

http://www.disc-tools.com/request?p=45296b29fb66b40368615a2649824326/daemon409-x86.exe

DAEMON Tools v4.09 X64 64 Bits (with SPTD 1.43)

http://www.disc-tools.com/request?p=13785116423d3de6a0611e6f0ce0494f/daemon409-x64.exe

Back to top
RazorsEdge




Posts: 1342
Location: Wehrmacht
PostPosted: Sat, 14th Apr 2007 12:46    Post subject:
Finaly. Very Happy
Back to top
$en$i
VIP Member



Posts: 3127

PostPosted: Sat, 14th Apr 2007 14:49    Post subject:
Ty for the heads up!

Btw, daemon tools pro? huh, sounds like a paying version, which would be a step in the wrong direction, with maybe features retentions for the paying version, etc.
Back to top
LeoNatan
☢ NFOHump Despot ☢



Posts: 73196
Location: Ramat Gan, Israel 🇮🇱
PostPosted: Sat, 14th Apr 2007 14:52    Post subject:
$en$i wrote:
Ty for the heads up!

Btw, daemon tools pro? huh, sounds like a paying version, which would be a step in the wrong direction, with maybe features retentions for the paying version, etc.

Daemon Tools Pro? Laughing It will be there to support the copy protection found in Duke Nukem Forever...
Back to top
$en$i
VIP Member



Posts: 3127

PostPosted: Sat, 14th Apr 2007 15:54    Post subject:
Lol, actually Daemon Tools Pro is old news, i forgot about it.
Back to top
Stainy




Posts: 280

PostPosted: Sat, 15th Dec 2007 16:32    Post subject:
I`ve had to uninstalled DTools.. as I was getting reboots on bootup.. when I would try safe mode it would list the files it`s loading and it would get to sptd.sys ( press ESC to stop loading ) no matter what I did my machine would reboot.. been looking on various forums etc... tried a supposed fix.. but it never worked for me!!

Annoying thing is.. it started all of a sudden..
ANyone help me more? unless I can install a replacement.. that doesn`t use the same files..
Back to top
VGAdeadcafe




Posts: 22230
Location: ★ ಠ_ಠ ★
PostPosted: Sun, 16th Dec 2007 08:19    Post subject:
Stainy wrote:
I`ve had to uninstalled DTools.. as I was getting reboots on bootup.. when I would try safe mode it would list the files it`s loading and it would get to sptd.sys ( press ESC to stop loading ) no matter what I did my machine would reboot.. been looking on various forums etc... tried a supposed fix.. but it never worked for me!!

Annoying thing is.. it started all of a sudden..
ANyone help me more? unless I can install a replacement.. that doesn`t use the same files..


Maybe you should try DAEMON Tools Lite Version 4.11 (included is SPTD version 1.53, don't know which was the one you had problems with)
Back to top
Stainy




Posts: 280

PostPosted: Sun, 16th Dec 2007 09:39    Post subject:
Lite was the last version I tried... Sad
Back to top
Mortibus




Posts: 18053
Location: .NL
PostPosted: Thu, 27th Dec 2007 04:15    Post subject:
no problems here, works perfectly
Back to top
Glottis
Banned



Posts: 6313

PostPosted: Fri, 11th Jan 2008 08:19    Post subject:
SPTD 1.55 is out.


C2D E6750 @ 3.2Ghz, 4GB 800MHz DDR2 4-4-4-12, GeForce GTX 260 c216 OC 896MB, 3.2TB, Windows 7 Ultimate x64

Xbox 360 Elite, PS2 Slim, Xbox
Back to top
bladek




Posts: 1

PostPosted: Mon, 28th Jan 2008 10:19    Post subject:
Old DEAMON Tools ftw.
Back to top
Page 1 of 1 All times are GMT + 1 Hour
NFOHump.com Forum Index - Applications
Signature/Avatar nuking: none (can be changed in your profile)  


Display posts from previous:   

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2.0.8 © 2001, 2002 phpBB Group