What are you guys using to overclock your Nvidia kepler cards?
I did the 1.3v unlock via Afterburner and cmd and applied the load line calibration fix. The problem Im having now is that whenever I apply too high of a core voltage, the GPU clocks throttle
Im using Kepler BIOS Tweaker 1.27 to tweak my own BIOS to raise the power limit. But no matter what power settings I put, the clocks seem to throttle. This is what my power table looks like:
I managed to get the card stable at 1320Mhz with 1.25v. If I raise the voltage, the clock throttles and dips to 1280Mhz. If I lower the voltage, my overclock becomes unstable.
Any tips?
ASUS Maximus XII Formula | Core i9 10900k @ 5.2Ghz | 32GB G.Skill DDR4 4200Mhz | EVGA RTX 3080 Ti FTW3 Ultra Hydro Copper | ASUS ROG PG35VQ
You need to unlock the power limit also, your card needs more juice after official 1.212V max voltage. There is Skynet OC bios for 780s in OCN that has everything you need. I would not go over 1.3v with reference 780, not even with watercooling.
Signature/Avatar nuking: none (can be changed in your profile)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
