| Page 72 of 111 |
|
|
|
| Back to top |
|
 |
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
 Posted: Thu, 6th Oct 2011 06:56 Post subject: |
|
|
So you pulled out the main power cable from the drive itself? Can you tell me exactly how you did it, from scratch?
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 07:20 Post subject: |
|
|
| Shawn_Hunter wrote: | | So you pulled out the main power cable from the drive itself? Can you tell me exactly how you did it, from scratch? |
When i come back this evening i'll tell you, but it's written here also on the last couple of pages, just unplug the main power cable and inmediately after hitting the erase liteon button ( in my case ) in jungleflasher plug it back in and you're done and the drive will be in vendor mode. it might cost you a couple of tries but then it goes in vendor mode eventually. ( i had done it before but together with a friend of mine and he had a special device for cutting the power off and on but i saw he didn't manage on first try that time. )
Stultorum infinitus numerus est
System: MSI B75MA-E33 / Intel i5-3470 / Geil DDR3 16 GB 1600 mhz / GIGABYTE 11GB D5X GTX 1080 Ti / Dell P2415Q / Crucial MX100 256 GB / Seagate 3500 & 2000 / Razor Abyssus 1800 / Coolermaster 650M
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 08:39 Post subject: |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 08:56 Post subject: |
|
|
Questions. I will flash my drive to LT 2.0 today. I will have someone else to do it for me. I have also read up on the Xk3y and considering ordering one. Will I still have to update my firmware in the future - ie opening up my box every time there's a new FW? I guess I still have to do that? If not I am really considering the Xk3y both for the ability to store games on HD and the convenience of not having to flash drive all the time.
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
headshot
VIP Member
Posts: 35913
Location: UK
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 11:33 Post subject: |
|
|
anyone having prolems burning these 2 xgd3 releses to cheaper media,Ive had hit & miss results with Aone,Usually getting around 50% when it starts the 2nd layer break i get power calibration error.cleaned my laser only made got a few to burn all the way burned at 2.4x & 4x.
Verbatims seem fine though
I'm using latest imgburn & pioneer 115d
just ordered a new pioneer DVR-S19LBK sata as my 115d is a fair few years old now & been very good over the years
|
|
| Back to top |
|
|
NFOAC
Posts: 6015
Location: India
|
| Posted: Thu, 6th Oct 2011 12:58 Post subject: |
|
|
Use clone CD its way cleaner and no fails
|
|
| Back to top |
|
|
BLaM!
VIP Member
Posts: 13818
Location: Germany
|
| Posted: Thu, 6th Oct 2011 13:17 Post subject: |
|
|
I have no fear , my console is here.. \o/
So , CloneCD is the way to go with XGD3 ..
|
|
| Back to top |
|
|
grimmmy
Posts: 1014
Location: London
|
| Posted: Thu, 6th Oct 2011 14:43 Post subject: |
|
|
I'm now 99% sure the layer breaks are wrong in the dvd files. I burnt two copies of Driver last night, one with the default from the .dvd file and allowed Imgburn to deal with it (so it takes the value) and the second I set manually to 2086912.
The first burn will not install. Seems to play off disc fine but maybe I've not got far enough to hit a problem. The second disc installed just fine.
Intel Core i7-4790K 4.00GHz - 32GB Kingston HyperX - Gigabyte Z97X-Gaming 7 - EVGA GTX 980 TI SC 6GB - Asus ROG Swift PG278Q
|
|
| Back to top |
|
|
acida
Posts: 52
Location: Bulgaria
|
| Posted: Thu, 6th Oct 2011 15:03 Post subject: |
|
|
| grimmmy wrote: | I'm now 99% sure the layer breaks are wrong in the dvd files. I burnt two copies of Driver last night, one with the default from the .dvd file and allowed Imgburn to deal with it (so it takes the value) and the second I set manually to 2086912.
The first burn will not install. Seems to play off disc fine but maybe I've not got far enough to hit a problem. The second disc installed just fine. |
I also think the same. On some DVD rw's imgburn atomatically sets the layerbreak to 2086912 so the burns are good. But on other writers it stay as it's in the .dvd file and the result is wrong layerbreak and erros on the 360. In the end setting the LB to 2086912 fixes the issue for many people and the result is the same as imgburn autosetting it so it should be the default LB anyway. It's even writenin GOW3 nfo:
| Quote: | In the case of growisofs as instructed below, in order to avoid
errors when burning XGD3 to regular DVD+R DL, you may choose to first
truncate the ISO to 8,547,991,552 bytes, and burn using a reduced
associated layerbreak of 2086912. This should give you exactly the
same end result as if you followed the instructions below for ImgBurn
on Windows. |
|
|
| Back to top |
|
|
NFOAC
Posts: 6015
Location: India
|
| Posted: Thu, 6th Oct 2011 15:10 Post subject: |
|
|
Shouldn't the layer break set to 2133520 ?
|
|
| Back to top |
|
|
BLaM!
VIP Member
Posts: 13818
Location: Germany
|
| Posted: Thu, 6th Oct 2011 15:31 Post subject: |
|
|
I burned GoW3 with imgburn , it works..for now. Im now burning Dark Souls with CloneCD we'll see how that goes..
|
|
| Back to top |
|
|
NFOAC
Posts: 6015
Location: India
|
| Posted: Thu, 6th Oct 2011 15:38 Post subject: |
|
|
What was your layerbreak set in .dvd ? and ImgBurn
|
|
| Back to top |
|
|
cobALT
Posts: 2340
Location: In a world created by fascist and used by cowards to manipulate
|
| Posted: Thu, 6th Oct 2011 15:39 Post subject: |
|
|
So is there a tutorial just for getting the key and updating LT+ on a LiteOn drive - without ck3 or any tools? The JF tutorial seems all over the place and the internet only shows me tutorial that require ck3. :/
[img:91f1fb12c3 ]http://i.imgur.com/fTzqMvq.gif[/img]
|
|
| Back to top |
|
|
BLaM!
VIP Member
Posts: 13818
Location: Germany
|
| Posted: Thu, 6th Oct 2011 16:18 Post subject: |
|
|
| NFOAC wrote: | | What was your layerbreak set in .dvd ? and ImgBurn |
ImgBurn: I just set calculate optimal.
CloneCD: I used .dvd file from Dark Souls .. so 2133520.
Both games work..
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 19:00 Post subject: |
|
|
| cobALT wrote: | | So is there a tutorial just for getting the key and updating LT+ on a LiteOn drive - without ck3 or any tools? The JF tutorial seems all over the place and the internet only shows me tutorial that require ck3. :/ |
The JF tutorial is the best tutorial. Its not all over the place, you just have to follow the links, instead of scroling from page 1 and down.
depending on your dashboard, it may be impossible to get the key without using a probe. If you got MS's firmware upgrade some months ago, you need a probe. Again read JF tutorial for help, or you can go to JF's channel on EFnet, people are mostly helpfull
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
cobALT
Posts: 2340
Location: In a world created by fascist and used by cowards to manipulate
|
| Posted: Thu, 6th Oct 2011 19:50 Post subject: |
|
|
| mvp wrote: | | cobALT wrote: | | So is there a tutorial just for getting the key and updating LT+ on a LiteOn drive - without ck3 or any tools? The JF tutorial seems all over the place and the internet only shows me tutorial that require ck3. :/ |
The JF tutorial is the best tutorial. Its not all over the place, you just have to follow the links, instead of scroling from page 1 and down.
depending on your dashboard, it may be impossible to get the key without using a probe. If you got MS's firmware upgrade some months ago, you need a probe. Again read JF tutorial for help, or you can go to JF's channel on EFnet, people are mostly helpfull |
I'm on LT+ 1.1 and the last dash update I did was the on that came with Bulletstorm.
I did follow the links but I don't see an option on getting the key and updating fw. The closest options I found assumes that I have the key or I'm starting from scratch, and here it assumes I have the ck3.
|
|
| Back to top |
|
|
| Page 72 of 111 |
All times are GMT + 1 Hour |
