Page 1 of 2 |
|
Posted: Mon, 24th Dec 2012 22:49 Post subject: OCing a 3750k |
|
 |
Hmmm ok so i did a vcore offset setting with the boost volt on the smallest increase, just like that famous guide online said. This is pretty much stock voltages etc, and i just upped the multiplier to 38 to reach 3.8 and did another test with 40 to reach 4.0 ghz
But im getting very high temps when stress testing with Prime95, im getting to the 85s and after some minutes hitting the 90s. ON both 3.8 and 4.0, let alone 4.0+
This is on the stock cooler, an Asrock Extreme4 and i changed the paste to AS5 and still the same results.
I thought this i was supposed to be a great OCer cpu, or is it the stock cooler? Hope i didnt get a bad chip or something...
|
|
Back to top |
|
 |
|
Posted: Mon, 24th Dec 2012 22:52 Post subject: |
|
 |
Of course it's the stock cooler. Those things are not made for custom Vcores and overclocks.
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
|
Posted: Mon, 24th Dec 2012 23:50 Post subject: |
|
 |
im on a relatively cheap alpensomething triglav and get around 35 something on idle with 4.4ghz
i5-3570k @4.4gHz, MSI GTX 970 GAMING 4g OC'd, MSI z77a-g45, Corsair Vengeance 8gb 1600mHz, Corsair TX650 PSU, Crucial M4 128gb, WD 1.5 TB HDD, Seagate 1TB HDD, LG 27MB85R-B 1440p
RSI name: ctulu
|
|
Back to top |
|
 |
Frant
King's Bounty
Posts: 24656
Location: Your Mom
|
|
Back to top |
|
 |
Frant
King's Bounty
Posts: 24656
Location: Your Mom
|
Posted: Tue, 25th Dec 2012 00:40 Post subject: |
|
 |
kazemaky wrote: | im on a relatively cheap alpensomething triglav and get around 35 something on idle with 4.4ghz |
Are you certain? Most modern Intel CPU's downclock to something like 1.6GHz when idling as well as dropping vcpre. You either had to disable every single power saving thing in the UEFI or you've locked voltage and CPU speed (well, both are the same thing).
Ph'nglui mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn!
"The sky was the color of a TV tuned to a dead station" - Neuromancer
|
|
Back to top |
|
 |
|
Posted: Tue, 25th Dec 2012 01:12 Post subject: |
|
 |
oh right, forgot it might idle at lower ghz
i dont have access to my pc atm so im not so sure about my temps anymore. I think they were max 60 or so under load. I changed tons of stuff in bios so no clue what it is in idle tbh.
i5-3570k @4.4gHz, MSI GTX 970 GAMING 4g OC'd, MSI z77a-g45, Corsair Vengeance 8gb 1600mHz, Corsair TX650 PSU, Crucial M4 128gb, WD 1.5 TB HDD, Seagate 1TB HDD, LG 27MB85R-B 1440p
RSI name: ctulu
|
|
Back to top |
|
 |
|
Posted: Tue, 25th Dec 2012 02:04 Post subject: |
|
 |
Didn't you just buy it? Why would you want to overclock it? Speed is more than enough for 99,9999% of the games.
|
|
Back to top |
|
 |
|
Posted: Tue, 25th Dec 2012 06:28 Post subject: |
|
 |
flipp wrote: | Didn't you just buy it? Why would you want to overclock it? Speed is more than enough for 99,9999% of the games. |
There's those of you who have hardware that's just enough
Then there's those of us who are enthusiasts and push everything as far as we can.
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
Przepraszam
VIP Member
Posts: 14517
Location: Poland. New York.
|
Posted: Tue, 25th Dec 2012 08:20 Post subject: |
|
 |
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
|
Posted: Tue, 25th Dec 2012 15:02 Post subject: |
|
 |
Why not OC it if it's easy and stable?
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
Frant
King's Bounty
Posts: 24656
Location: Your Mom
|
Posted: Tue, 25th Dec 2012 22:16 Post subject: |
|
 |
The issue with Ivy Bridges aren't the CPU silicon itself, it's the cheap bonding Intel used between CPU and heat casing on the Ivy's. I hope they learnt their lesson for the next gen.
Ph'nglui mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn!
"The sky was the color of a TV tuned to a dead station" - Neuromancer
|
|
Back to top |
|
 |
|
Posted: Tue, 25th Dec 2012 22:21 Post subject: |
|
 |
Yes i know. But even when de-lidded it generates more heat than SB.
|
|
Back to top |
|
 |
|
Posted: Wed, 26th Dec 2012 04:33 Post subject: |
|
 |
.... so the 2500k was the correct choice, fuck me. ill just sport it stock for some years.
|
|
Back to top |
|
 |
W123
Posts: 2528
Location: USA
|
Posted: Wed, 26th Dec 2012 09:01 Post subject: |
|
 |
Did you try lowering the voltage? What is the vcore at? If its at automatic, it will definitely be pumping more voltage than the CPU needs.
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
|
Posted: Wed, 26th Dec 2012 12:21 Post subject: |
|
 |
When ocing to 3.8ghz i get 1.200, 1.208 max, and temps go to 85 fast and they start rising slowly to the 90+
|
|
Back to top |
|
 |
|
Posted: Wed, 26th Dec 2012 12:33 Post subject: |
|
 |
Friend has PC with 3570K and True Spirit 120, things get still very hot. I would recommend something like silver arrow or closed watercooling for Ivy if you are on budget (Antec 620 is pretty cheap and good with 2x gentle typhoons).
@Lopin18
3.8Ghz is the default turbo , should run much lesser volts than 1.2v, unless yors is world crappiest Ivy chip in the world. I would try with new cooler something like 1.2v - 1.25v and 4.5Ghz clocks.
|
|
Back to top |
|
 |
|
Posted: Wed, 26th Dec 2012 13:10 Post subject: |
|
 |
I have an Arctic i30 with a 3570K, at full load on 4.6Ghz it hits 69 degrees. Keep in mind that the 3570 is faster than the 2500 clock per clock. So a 3570 at 4.6 will be equal to a 2500 at 4.9-5 Ghz.
Don't forget to disable the iGPU.
|
|
Back to top |
|
 |
|
Posted: Wed, 26th Dec 2012 13:14 Post subject: |
|
 |
Ivy is about 200mhz ahead of SB at same clocks, not 300-400mhz. Its 2-5% faster clock vs clock, in like 99% of tests what i have seen.
Last edited by Breezer_ on Wed, 26th Dec 2012 13:23; edited 1 time in total
|
|
Back to top |
|
 |
|
Posted: Wed, 26th Dec 2012 13:22 Post subject: |
|
 |
I have read many reviews before buying, it averages at ~300Mhz.
|
|
Back to top |
|
 |
|
Posted: Wed, 26th Dec 2012 19:46 Post subject: |
|
 |
flipp wrote: | SpykeZ wrote: | flipp wrote: | Didn't you just buy it? Why would you want to overclock it? Speed is more than enough for 99,9999% of the games. |
There's those of you who have hardware that's just enough
Then there's those of us who are enthusiasts and push everything as far as we can. |
Yeah, ok I understand that, but IMO it's silly to overclock new hardware if you are low on cash. Not sure how significant this is to the electricity bill
But well, I think he just have to be patient till his GFX arrives. Good luck with the overclocking if you are not  |
Why's it silly to OC new hardware? Cash has nothing to do with it. If you do your reviews and research before hand to know your max safe voltages and safe temps, you have nothing to worry about. The myths of decreasing it's life are BS. Ya it will reduce the life but CPU's usually have about a 15+ year life expectancy. It's said you'll get 6+ years out of a 24/7 OC'd chip and by the time he even gets to 6 years, the chances of an upgrade are more than likely anyways.
Back on topic, I found the guide for you over on overclock.net Enjoy
http://www.overclock.net/t/1198504/complete-overclocking-guide-sandy-bridge-ivy-bridge-asrock-edition
Max temp for ivy bridge looks to be 105C but that isn't to say you should push it that high. The corsair hydro series coolers are great and pretty affordable. I paid 60 bucks for my H50 and still have it and still doing a great job.
|
|
Back to top |
|
 |
|
Posted: Wed, 26th Dec 2012 21:21 Post subject: |
|
 |
Yeah thats the guide i followed, thats why i was Ehhhh wtf, it should be working why is this thing melting.
Ill get an air cooler probably that Cooler Master Evo thing.
|
|
Back to top |
|
 |
W123
Posts: 2528
Location: USA
|
Posted: Wed, 26th Dec 2012 22:17 Post subject: |
|
 |
Breezer_ wrote: | Friend has PC with 3570K and True Spirit 120, things get still very hot. I would recommend something like silver arrow or closed watercooling for Ivy if you are on budget (Antec 620 is pretty cheap and good with 2x gentle typhoons).
@Lopin18
3.8Ghz is the default turbo , should run much lesser volts than 1.2v, unless yors is world crappiest Ivy chip in the world. I would try with new cooler something like 1.2v - 1.25v and 4.5Ghz clocks. |
Agreed. Sounds like a lot of voltage for 3.8 ghz. But each chip is different and i've no experience OC'ing i7s.
At 4.2 ghz and 1.1vcore my 3570K stays around 52-53 degrees C doing intel's torture test on max settings with my coolermaster hyper212 plus. I havent tried to push it further than that since i dont see much point in it, besides the fun of tweaking your bios. Plus they are 10% faster than Sandy clock for clock. Pretty happy with ivy bridge... though i gotta say if sandy was cheaper than Ivy, i'd have bought one instead.
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
Sin317
Banned
Posts: 24321
Location: Geneva
|
Posted: Wed, 20th Mar 2013 14:49 Post subject: |
|
 |
so, saw that stuff about the bad thermal paste used in the IHS on the ivy, so i figured, lets give it a try and remove it. But once i took the cpu out, it didn't really looked like its possible to take it off. I mean, the IHS is really REALLY close to the PCB of the chip and its like cutting into the plastic more then anything. So i dropped it and put it back in and while i was at it, i added a second fan to my 212, so now it has push and pull air. Thing is, there certainly is a big difference in temps between the cores. Core0 is the coolest, now in idle, its 21C. Core1 is 32, Core3 25 and Core3 32 ... and under prime95, its pretty much the same difference.
So i was wondering. Is it possible, that intel started to solder the IHS on newer batches of the 3750k maybe ? Or did i just not try good enough, to remove it?
Btw, i have it run at 4.4ghz now, at 1.225V and in prime it hardly goes over 70.
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
Page 1 of 2 |
All times are GMT + 1 Hour |