| Page 15 of 24 |
|
|
 Posted: Tue, 15th Nov 2005 00:10 Post subject: |
|
 |
| egoldner wrote: | Yes.. if you Update any of the Starforce games you will have to physically unplug the cables!!
Now... if you have a Laptop i don't have a clue how to make it work! sorry...
Still trying to make Path Of Neo updated to work! But still no luck .. reinstallign it now.. |
I have SCCT 1.05 and works without unpluging anything. The only games that require unpluging are those that use SF 3.5 and above.What are u talking about? Besides SCCT I also have GT Legends and World Racing 2 installed, so the updated drivers are there: there are 2 Enviroment drivers (1.x and 6), 3 Helper Drivers (simple, v.2 and v.2.x) 2 Synchronization Drivers (v1 and v 2.x) and one VFS Driver (2.x). Is that enough of updated drivers for you?
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 00:11 Post subject: |
|
|
Good Day,
I have a Technical question about SF protection. Sorry if the answer is obvious...but there is no harm in questioning:
Every time you install a newer game with Starforce Protection, the newer version of SF is installed in your system. Let say, you installed Splinter Cell CT. It works like a charm with DT4 and SFNighmare, because the protection version is below 3.6. Now, lets asume you install GT Legends, game that, as I have read, uses SF 3.6 or above version. As I understand, in that momment, after installing GT Legends, a new SF version is installed in your system (3.6 and above). Now if you want to play Splinter Cell again, I dont think the game will install an older version of SF protection, instead, it will use your new installed 3.6 SF version...Then ....Will you have to unplug ide cables from that momment on?...In other words...After installing a game with a SF version above 3.6, all games, even the ones that were working properly with DT4+SFNightmare (example Splinter Cell CT), are useless, and you have to unplug ide cables from now on?
Thanks
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 00:17 Post subject: |
|
|
| waltgill wrote: | right like i said earlier in this thread have allready tried some games but with no luck....but
i have downloaded 2 versions of daemon tools 4
the first is dldaemon400_cust.exe and is 1.32mb
the other is daemon400.exe and is 1.39mb |
first doesnt have any adware cuz its version for customers, second its free for all version so it has adware. i hope i`m not wrong
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 00:35 Post subject: |
|
|
@murekz
what did u done exactly to run x3 reunion??? i mounted the iso with dt4...run sfn...diesable node, disable cd and disable the ide channels for my cd drives...started the game and get the error with no cd bla bla bla bla...do i have to remove the ide cables from my cd/dvd drives or and also the power cables??? please can u tell me exactly the steps that u done to bring x3 to work?!?!
thx alot!!
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 00:42 Post subject: |
|
|
| cyraxx wrote: | @murekz
what did u done exactly to run x3 reunion??? i mounted the iso with dt4...run sfn...diesable node, disable cd and disable the ide channels for my cd drives...started the game and get the error with no cd bla bla bla bla...do i have to remove the ide cables from my cd/dvd drives or and also the power cables??? please can u tell me exactly the steps that u done to bring x3 to work?!?!
thx alot!! |
ok here it is i unplugged just the ide cable not the power leave that on then mount the game in dt4 then start the game
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 00:45 Post subject: |
|
|
thx alot murekz!!!
so do i have to start sfn then? and if what do i have exactly to do on sfn?? disable only cd or node or both???
can u please make a tutorial for "dummys" like myself??? step by step...
thx again for ya help!!
Last edited by cyraxx on Tue, 15th Nov 2005 00:51; edited 2 times in total
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 00:54 Post subject: |
|
|
| Drvre wrote: | | egoldner wrote: | Yes.. if you Update any of the Starforce games you will have to physically unplug the cables!!
Now... if you have a Laptop i don't have a clue how to make it work! sorry...
Still trying to make Path Of Neo updated to work! But still no luck .. reinstallign it now.. |
I have SCCT 1.05 and works without unpluging anything. The only games that require unpluging are those that use SF 3.5 and above.What are u talking about? Besides SCCT I also have GT Legends and World Racing 2 installed, so the updated drivers are there: there are 2 Enviroment drivers (1.x and 6), 3 Helper Drivers (simple, v.2 and v.2.x) 2 Synchronization Drivers (v1 and v 2.x) and one VFS Driver (2.x). Is that enough of updated drivers for you? |
Well... then i don't know what's going on!!!
Because here was working perfectly fine just with SFN ...
After i updated it to 1.05 it it just didn't want to work anymore... ( Disc not found )!!
Then unpluged the cables and voila, worked again!!
That's very strange... what have you used to desable your CD/DVD drives???
|
|
| Back to top |
|
|
Ronhrin
Banned
Posts: 6428
Location: Paradigms are changeable, reality is absolute.
|
| Posted: Tue, 15th Nov 2005 00:56 Post subject: |
|
|
any luck with X3 Reunion?
He who sacrifices freedom for security deserves neither
- Benjamin Franklin - 1759
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 00:57 Post subject: |
|
|
@ Ronhrin
waiting for the tutorial from murekz..he said he can run x3 reunion...hope that will work if not....shit on starshit...blaaaahhh hate that russians!!
|
|
| Back to top |
|
|
Ronhrin
Banned
Posts: 6428
Location: Paradigms are changeable, reality is absolute.
|
| Posted: Tue, 15th Nov 2005 01:03 Post subject: |
|
|
I've always said that my limit ends when I have to disconnect my cables, so, as long as it works by software cracking alone, I will try it, if I have to disconnect anything just f*ck it, I want X3 badly, but I will never play it if I have to pass my limit, so, really hope DT4 or DT4 Pro will work, one thing is certain, I will not buy Starforce games, despite of what is going by in the p2p world, we should be able to backup what we buy, and I will not support things like starforce, thats what I believe
He who sacrifices freedom for security deserves neither
- Benjamin Franklin - 1759
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 01:06 Post subject: |
|
|
@ Ronhrin
sorry dude but u should then delete x3 from your harddisk...cuz the only way to get it run is to disconnect your ide cables.....and about starshit.....shit on them and lets hope that dt4 pro will get this problem solve with their "ide plugin" or whatelse
|
|
| Back to top |
|
|
Ronhrin
Banned
Posts: 6428
Location: Paradigms are changeable, reality is absolute.
|
| Posted: Tue, 15th Nov 2005 01:13 Post subject: |
|
|
so basicly, DT4 means nothing, we have to follow the same ridiculous methods in order to get the damn games to work....
He who sacrifices freedom for security deserves neither
- Benjamin Franklin - 1759
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 01:20 Post subject: |
|
|
I just cant get it to work, On my laptop when I lclick the splinter cell shortctu it is asking me to insert the correct cd into another cd rom. So i disable CD using sfnightmare. It then continues and asks me for a cd-key. I enter and then it tells me to wait while it checks the CD. Then it gives me "DISK READ ERROR" Make sure cd is in drve. But how can it be in drive if the mds and the image file that i mounted were on the CD which I disabled using sfnightmare?
How do i pess this cd key thing?
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 01:22 Post subject: |
|
|
i just tried moments ago to get run x3...without any sucsses...here is what i did :
disconnected ide cables manually
boot my system up
mount x3 with dt4
start sfn - disable node - disable cd - disable node
start x3....get the fucking error...so i try a 2nd way:
disconnected ide cables manually
boot my system up
mount x3 with dt4
start sfcure in that way: !run, !setup
then i started sfn....disable nd, disable cd and disable nd
then i started "!start" from sfcure...
started x3....get again that fucking crap error...
is anyone there who can help me?!?!?! pleaseeeeee....
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
Ronhrin
Banned
Posts: 6428
Location: Paradigms are changeable, reality is absolute.
|
| Posted: Tue, 15th Nov 2005 01:24 Post subject: |
|
|
I will wait for DT4 Pro, if Pro version doens't solve what it was supposed to solve, it's over for me, deep down I've always knew DT4 would be a masterflaw
|
|
| Back to top |
|
|
Ronhrin
Banned
Posts: 6428
Location: Paradigms are changeable, reality is absolute.
|
| Posted: Tue, 15th Nov 2005 01:27 Post subject: |
|
|
I'm just pissed of with this crappy program
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 01:29 Post subject: |
|
|
| cyraxx wrote: | @ Ronhrin
waiting for the tutorial from murekz..he said he can run x3 reunion...hope that will work if not....shit on starshit...blaaaahhh hate that russians!! |
i said how to do it install then patch the game if u havent.....shut down ur pc unplug just the ide cable start.....mount and then start the game its easy as pie
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 01:30 Post subject: |
|
|
@pallebrun
which channel did u exactly disabled in sfn??? i heard that u have to disable channel 2....what does channel 2 do???
|
|
| Back to top |
|
|
Ronhrin
Banned
Posts: 6428
Location: Paradigms are changeable, reality is absolute.
|
| Posted: Tue, 15th Nov 2005 01:33 Post subject: |
|
|
that's why I'm pissed of, what DT4 has brought? most certainly nothing new!, I could get the games to work by following that method.
DT4 was the hope for stopping that shitty method!!
it was what I'm trying to say!
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 01:34 Post subject: |
|
|
anyone?
I just cant get it to work, On my laptop when I lclick the splinter cell shortctu it is asking me to insert the correct cd into another cd rom. So i disable CD using sfnightmare. It then continues and asks me for a cd-key. I enter and then it tells me to wait while it checks the CD. Then it gives me "DISK READ ERROR" Make sure cd is in drve. But how can it be in drive if the mds and the image file that i mounted were on the CD which I disabled using sfnightmare?
How do i pess this cd key thing?
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
Ronhrin
Banned
Posts: 6428
Location: Paradigms are changeable, reality is absolute.
|
| Posted: Tue, 15th Nov 2005 01:35 Post subject: |
|
|
I will draw my final line of hope on DT4 Pro, after that, game over
He who sacrifices freedom for security deserves neither
- Benjamin Franklin - 1759
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 01:36 Post subject: |
|
|
| Ronhrin wrote: | | I will wait for DT4 Pro, if Pro version doens't solve what it was supposed to solve, it's over for me, deep down I've always knew DT4 would be a masterflaw |
you should start spent some time programming something then you will find out that sometimes it can be very difficult .just be patient I believe that some day in the future we will see the IDE plugin.
|
|
| Back to top |
|
|
Phluxed
VIP Member
Posts: 4911
Location: Oakville, Ontario, Canada
|
| Posted: Tue, 15th Nov 2005 01:37 Post subject: |
|
|
Apparently its out, but I can't get it. If you have it, upload it and link it.
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 01:39 Post subject: |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 15th Nov 2005 01:39 Post subject: |
|
|
but as far as i understand Securom 7 stop is not needed anymore or is it ? (only for new securom 7 version you need to also unplug IDE drives? oh well will try Vietcong 2 now
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
| Page 15 of 24 |
All times are GMT + 1 Hour |
glad to help...have u tried it?
