| Page 4 of 5 |
|
|
|
| Back to top |
|
 |
|
|
 Posted: Thu, 8th Dec 2005 04:09 Post subject: |
|
|
So... i´ve read all the posts and got no answer...
Can´t play the game...
Installed the image with Alcohol, umounted it, installed dt4, enabled all options...
It asked me for the serial, i´ve put the serial i got from the nfo...
And now i get an error to use POP in another drive... how can i bypass this?
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 8th Dec 2005 09:40 Post subject: |
|
|
HI GUYS
WORKED FOR ME HERE JUST UNPLUGGED MANUALLY THE cd WRITER AND THE dvd ROM FROM THE MOTHERBOARD AND ALSO FROM THE PSU (POWERSUPPLY) MOUNTED THE GAME IN DT4 (DAEMON TOOLS 4) INSTALLED IN FULL ENTERED THE SERIAL NUMBER AND IT WORKED
BY THE WAY EMULATIONS ARE OFF FOR MY DAEMON TOOLS
HOPE THIS HELPS YOU
REGARDS
ROBBYGEE
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 8th Dec 2005 09:52 Post subject: |
|
|
HI GUYS
WORKED FOR ME HERE JUST UNPLUGGED MANUALLY THE cd WRITER AND THE dvd ROM FROM THE MOTHERBOARD AND ALSO FROM THE PSU (POWERSUPPLY) MOUNTED THE GAME IN DT4 (DAEMON TOOLS 4) INSTALLED IN FULL ENTERED THE SERIAL NUMBER AND IT WORKED
BY THE WAY EMULATIONS ARE OFF FOR MY DAEMON TOOLS
HOPE THIS HELPS YOU
REGARDS
ROBBYGEE
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 8th Dec 2005 13:18 Post subject: |
|
|
Finally got it working.
All you have to do is:
1. Install POP.
2. Install Daemon tools 4
3. Shut down the computer.
4. PHISICALLY rip the cables, of your cd / dvd off (power and ide)
5. Turn On the PC.
6. Mount Image in Dtools...
7. PLAY
|
|
| Back to top |
|
|
froid
Posts: 30
Location: Bulgaria
|
| Posted: Thu, 8th Dec 2005 14:48 Post subject: |
|
|
What did you do with this. I don't spek english
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 8th Dec 2005 15:25 Post subject: |
|
|
well, it's not working for me sadly 
will have to stick with unplugging my drives... the game is great, and i don't really need them often, so i can live with that 
To deactivate the CD-Rom, just select the StarForce Copy Protection in the Box and press "CD8 deaktivieren" an to activate it again "CD8 aktivieren".. maybe it works for you
|
|
| Back to top |
|
|
SycoShaman
VIP Master Jedi
Posts: 24468
Location: Toronto, Canada
|
| Posted: Thu, 8th Dec 2005 16:25 Post subject: |
|
|
Ok, too all those having problems, try this
1. Mount in DT4 (or 3.47) and Install
2. Unplugg Ide cables
-----
This step may not be needed, skip to 4 if its not and ur sure
3.Run SFcure (dos version - !start.bat)
-----
4. Run Starforce Nightmare and click the options in this order -> Disable Node -> Disable CD -> Disable Node
5. Play Game.
Some SF games for some reason, still require you to disable your cd drive and node even tho the IDE cables are unplugged, I dunno why.
This method has worked for me since I tried it with X3: Reunion - compliments of Baleur btw
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 8th Dec 2005 17:54 Post subject: |
|
|
GUUYS..problem with Startin game is Easy..its not so hard 2 rip ur cabels..But what 2 do when
ur comp is been restarted during chechin disk..just simply reboot..Nothing helped me with SCT..i used SF cure..nothin..but then i did that and plus i unpluged da cabels it worked..But now with POP then Night of the tample and King Kong durin checkin disk ma comp simply restart..does any body have an idea..thing with SF cure and ripin of cabels simply dot work..
SUGGESTIONS pls
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 8th Dec 2005 21:37 Post subject: |
|
|
you could try writting in proper english...
if you dont have DT4 installed do that after its installed shutdown the PC remove the power cables from you cd-roms (all of them) and remove the ribon wire ( i had to) start the PC mount game run game. if that doesnt work you will have to wait for a fixed .exe
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 10th Dec 2005 12:26 Post subject: |
|
|
It says to me : Insert disc in other drive ... can some one help me to fix this ?? also kingkong says this
----- > l33t Gamer
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 10th Dec 2005 15:16 Post subject: |
|
|
I tried everythign on my gaming laptop (HP ZD8000 3.4GHz 2GB 256MB X600) and couldn't get it to work. So then I tried to install it on my Toshiba TabletPC and it worked right away. I mounted it on DT4, soft-disable of the DVD drive, installed, reboot, and it worked fine.
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 10th Dec 2005 19:08 Post subject: |
|
|
here is how I got it to work
1. Uninstall the game
2. Run the exe from the link above to remove starforce drivers. It will ask you to restart. Do so
3. Install the game
4. launch the game
5. when it asks you to restart, click no. and SHUTDOWN your computer manually.
6. then its off unhook for your cables for your ide cd/dvd-rom drive.
7. Start your computer up
8. launch the game
9. enter the cd key
10. Play game
got it from
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 10th Dec 2005 21:40 Post subject: |
|
|
Ok, for all you that the computer reboots in the starforce CD Check:
it seems it happens to anyone who haves NF3/4 Mobo with sata or raid HDs
i saw a thread in DT forum that stated that DT4 dont work well with NF3/4 with sata or raid installed (i mean your HD are configured as Raid).
to work around this problem, you can mount the image on alcohol and it works.
now im stuck, starforce states that my CD key is not good, even though i use the one from the nfo.
this problems happens to me also on Kingkong.
ive tried somthing, ive mounted the image from a mapped drive on the network with DT4 (my second computer) and it finaly works.
i think that starforce dont like nf3/4 sata raids HD at all.
you can also move the image to a non raid or sata drive and i think it will work, as i saw on some posts.
try it and let me know.
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 11th Dec 2005 00:17 Post subject: |
|
|
After it started working on my TabletPC, I using the software to remove the starforce drivers from my other laptop (ZD8000). I ejected the dvd-drive, mounted, installed, rebooted, and now it works fine. If only i wasn't scared of heights i would like this game better.
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 11th Dec 2005 00:38 Post subject: |
|
|
i have a big problem here. I used SFNightmare to disable CD and Node, that didnt work.
Next time when i switch on my PC, it switches off straight away...i have to run it in safe mode to start up.
I cant do system restore, that always fails, and using SFNightmare to re enable CD and node do not work either.
Please help, im running Windows XP SP2.
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 11th Dec 2005 04:56 Post subject: |
|
|
popeofdope, you dont need sfnightmare. You just need to remove the ide cables of your real drives.Then mount the image in dt4 and play the game.
1 and 2 are still amazing.
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 11th Dec 2005 07:46 Post subject: hi all |
|
|
I need to know something mybe you can help me !!!!
I have the USB2.0 H.D MATROX I install the prince of percia T2T SFCloneDVD and works perfectly with DT4 but I still hade to remove the ide .Why is that if I hade installed the game from the pc and not from the rom.Any idea.I know that is starforce protection .
Thnx
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 11th Dec 2005 08:12 Post subject: |
|
|
I cant exactly understand what you want to ask but I'll give it a shot. You cant make a copy of it because as of today it is not possible to make a 1:1 copy of starforce 3.5.0.0 and above games. You have to remove the ide cables because they are physical drives and need to be disconnected so that starforce doesnt force you to put the cd there.
1 and 2 are still amazing.
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 11th Dec 2005 14:40 Post subject: |
|
|
Look, i have an nforce3 mobo, the DT4 was rebooting my pc, so i tried with alcohol instead with SFN with the CD disable and node disable and is finally working, so ppl if you have problem with the rebooting thing just try with the alcohol, just my two cents...
|
|
| Back to top |
|
|
|
|
| Posted: Sun, 11th Dec 2005 14:41 Post subject: |
|
|
something I forgot to tell, the IDE and POWER cables where disconnected too..
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Mon, 12th Dec 2005 14:42 Post subject: |
|
|
Reinstall the game and check again
1 and 2 are still amazing.
|
|
| Back to top |
|
|
|
|
| Posted: Mon, 12th Dec 2005 15:21 Post subject: |
|
|
i have a strange problem as well. PoP is working like a charm. I've disconnected my DVD burner and DVD drive en installed the game with DT4.
Now when I want to burn something and I reconnect my drives they are not detected by windows. I've checked the BIOS and they are detected. Is this a known problem with starforce.
My specs are:
Windows XP SP2
P4@2.4 Ghz
2048 MB mem
Asus P4B533 mainboard
Plextor PX-750A DVD burner
Plextor PX-130A DVD rom
I really don't hop that starforce fucked up my windows installation or this suppose to happen and will my drive reappear when I deinstall PoP
THX in advance
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 13th Dec 2005 01:21 Post subject: |
|
|
So what's the recommended order to install ?
|
|
| Back to top |
|
|
| Page 4 of 5 |
All times are GMT + 1 Hour |
..
