| Page 1 of 1 |
|
|
 Posted: Mon, 1st Jun 2009 16:01 Post subject: [XBOX360] Imgburn and forced writing speeds |
|
 |
my burner at home for some reason insists on trying to burn stuff too fast. my plextor at work will burn most media at 2.4x and i have no problem with it. my samsung burner at home though will default to 4x on most stuff and 9 times outta 10 it won't play in my 360. i know the media tells imgburn what minimum speed it can be burned at but is there a way to force it to burn a disc at 2.4x or something?
|
|
| Back to top |
|
|
|
|
| Posted: Mon, 1st Jun 2009 16:02 Post subject: |
|
|
It has an option for speed (under the device options, just before starting the write)
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 2nd Jun 2009 15:28 Post subject: |
|
|
dude c'mon i'm not that clueless. what i'm saying is i put a verbatim in my plextor here at work and it imgburn will say it can burn it at 2.4x and 4x. i go home and put that same blank into my samsung and it shows the minimum speed as 4x, where as the plextor shows 2.4x.
from what i have read it has something to do with the media telling your drives firmware what speeds it can be burned at. something like that anyway.
|
|
| Back to top |
|
|
Weedo
Posts: 1506
Location: Japan
|
| Posted: Tue, 2nd Jun 2009 16:31 Post subject: |
|
|
This sounds like your Samsung just doesn't support slower writing speeds. If this is the case there's nothing you can do. Well almost nothing. Maybe there's a firmware hack or something.
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 2nd Jun 2009 16:36 Post subject: |
|
|
Did you try a new firmware for the Samsung? Recently my Lite-On refused to burn any dvds, so I updated the firmware and everything works fine again.
|
|
| Back to top |
|
|
deelix
PDIP Member
Posts: 32062
Location: Norway
|
| Posted: Tue, 2nd Jun 2009 16:45 Post subject: |
|
|
yeah, id look for a firmware update. Sounds really strange tho, I use crap laptop burner - always burn at 4x
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 2nd Jun 2009 17:24 Post subject: |
|
|
The software will burn at any speed you like up to the maximum of the media. You should look for a Samsung update with preferably altered bitsettings for the media you use.
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
| Page 1 of 1 |
All times are GMT + 1 Hour |
